2. Disconnect the connector (P9).
3. Remove 3 screws and then remove the AC Inlet Assy.
8.33. Removal of Front Glass, V1,
V3, V-Board and Cabinet Assy
1. Disconnect the connector (A11).
2. Disconnect the Joint Connector.
3. Remove the Side Power Unit and disconnect the connec-
tor (S34).
(Refer to Removal of S1-Board and V2-Board)
4. Remove 12 screws ( ).
5. Remove 8 screws ( ).
6. Remove 10 screws ( ).
7. Pull the bottom of the Cabinet Block forward and lift.
8. Remove the Cabinet Block.
8.33.1. Removal of Front Glass
1. Remove 44 screws and then remove the Glass Fixing
Metals Assy (left, right, top, bottom).
2. Remove the Front Glass.
Note: when fixing Glass Fixing Metal Assy
• Screw on 4 screws (1) firstly.
47
TH-103PB1E