Disassembly And Assembly Instructions; Removal Of Rear Cover; Removal Of Slot Block; Removal Of Ds-Board - Panasonic TH-42PF30U Service Manual

TH-42PF30U
8 Disassembly and Assem-
bly Instructions
• To disassemble P.C.B., wait for 1 minute after power was off
for discharge from electrolysis capacitors.
• , , , and marks indicate screw positions.
8.1.

Removal of Rear Cover

1. Remove screws (×17
then remove the Rear Cover.
8.2.

Removal of Slot Block

1. Disconnect the connectors (DS13, P9).
2. Remove the flexible cable from the connector (DS1).
3. Remove 4 screws and then remove the Slot Block.
8.3.

Removal of DS-Board

1. Remove the Slot Block.
(Refer to Removal of Slot Block)
2. Turn over the Slot Block.
, ×23
) and M8 CAP (×4
3. Remove 6 screws and then remove DS-Board.
)
8.4.

Removal of D-Board

1. Remove the Slot Block.
(Refer to Removal of Slot Block)
2. Disconnect the connector (D25).
3. Remove the flexible cables from the connectors (D15,
D20, D31, D32).
4. Remove 6 screws and then remove D-Board.
8.5.

Removal of HX-Board

1. Disconnect the connector (A14, A38).
22