Troubleshooting - Washtech UL Operator's Manual

User Programming
The User Settings menu is accessed for programming by pressing the UP and DOWN
keys simultaneously for a few seconds.
The programming options are specified in the table below:
User Settings
Power Save
Detergent Injection Time
Display Contrast
Power Save function reduces the rinse temperature setting by 10°C when the machine is idle
for 5 minutes or more. The temperature settings return to the set value when door is opened or
START/STOP key is pressed.

Troubleshooting

If an error message appears on the control display first try turning the machine OFF for 30
seconds and then back ON. If the error message remains then call for service with the exception
of the following:
Display Code
7. Fill Failure - wash tank
not full after fill timeout
8. Drain Failure
8 UL - Operator Manual 141124
Default
ON
12
27
Cause
Check flow rate of water supply
Drain hose jammed/blocked
Selection
ON/OFF
5 - 30 secs
10 - 40
Remedy
Check water supply
Check/unblock drain
hose