NETGEAR WND930 Reference Manual page 64

Table 2. Factory default settings (continued)
Feature
AP EDCA parameters (QoS settings)
Station EDCA parameters (QoS settings)
Wireless bridging
Default Wireless Profile and Profile Security
Profile name
Wireless network names (SSIDs)
Broadcast wireless network names
(SSIDs)
Network authentication
Data encryption
Wireless client security separation
Outdoor High Power Wireless N Access Point
Description
• AIFS. The Arbitration Inter-Frame Spacing (AIFS) interval
specifies, in milliseconds, the wait time between data
frames.
• CwMin. The minimum contention window (CwMin) value
specifies the upper limit (in milliseconds) of a range from
which the initial random back-off wait time is determined.
• CwMax. The maximum contention window (CwMax)
value specifies (in milliseconds) the upper limit for the
doubling of the random back-off value.
• Max. Burst. The maximum burst value specifies (in
milliseconds) the maximum burst length allowed for
packet bursts on the wireless network.
• AIFS. The Arbitration Inter-Frame Spacing (AIFS) interval
specifies, in milliseconds, the wait time between data
frames.
• CwMin. The minimum contention window (CwMin) value
specifies the upper limit (in milliseconds) of a range from
which the initial random back-off wait time is determined.
• CwMax. The maximum contention window (CwMax)
value specifies (in milliseconds) the upper limit for the
doubling of the random back-off value.
• TXOP Limit. The transmission opportunity (TXOP) is an
interval of time (in milliseconds) when a client station can
initiate transmissions on the wireless medium (WM).
Disabled
NETGEAR
NETGEAR_11ng
NETGEAR_11na
Enabled
Open system (no authentication)
None
Disabled
Supplemental Information
64