The user name is admin and the default password is password.
The General screen displays.
5.
Select Configuration > Wireless Bridge.
Note:
If the access point is using the Auto channel setting, you are prompted
to select a channel. To specify the channel, select Configuration >
Wireless > Basic, select a channel, and click the Apply button.
6.
Select the band that you want to use for the bridge:
•
To set up the bridge on the 2.4 GHz band, click the 802.11b/bg/ng tab.
•
To set up the bridge on the 5 GHz band, click the 802.11a/na tab.
7.
Select the Enable Wireless Bridging check box.
8.
Select the Wireless Point-to-Multi-Point Bridge radio button.
9.
To enable wireless client association, select the Enable Wireless Client Association check
box.
Outdoor High Power Wireless N Access Point
Network Settings
40