Table of Contents
Advertisement
Set Up SNMP
Enable SNMP to allow the SNMP network management software, such as HP OpenView, to
manage the wireless access point by using the SNMPv1/v2 protocol.
To set up SNMP:
1.
Launch a web browser on the computer that is connected to the access point.
2.
In the address field of the browser, enter http://192.168.0.100.
A login prompt displays.
3.
Enter the user name and password.
The user name is admin and the default password is password.
The General screen displays.
4.
Select Maintenance > SNMP.
5.
Leave the SNMP Enable radio button selected.
6.
Specify the settings:
•
Read-Only Community Name. The public community string to allow the SNMP
manager to read the wireless access point's MIB objects.
•
Read-Write Community Name. The private community string to allow the SNMP
manager to read and write the wireless access point's MIB objects.
•
Trap Community Name. The community name that is associated with the IP address
to receive traps.
•
IP Address to Receive Traps. The IP address of the SNMP manager to receive traps
sent from the access point.
7.
Click the Apply button at the bottom of the screen.
Your settings are saved.
Outdoor High Power Wireless N Access Point
Manage the Access Point
46
Advertisement
Table of Contents
Troubleshooting
