Factory Settings - NETGEAR WND930 Reference Manual

Factory Settings

You can return the access point to its factory settings. Use the end of a paper clip or a similar
object to press and hold the Reset button on the front of the access point for at least seven
seconds. The access point resets and returns to the factory settings shown in the following
table.
Table 2. Factory default settings
Feature
Login for Management and Configuration
LAN IPv4 management address
Subnet mask for IPv4 management
address
Required static IPv4 address for
management computer
User name (case-sensitive) for login
Login password (case-sensitive) for login password
LAN and Management Features
DHCPv4 client
Syslog
Spanning Tree Protocol (STP)
Time zone
NTP client
Custom NTP server
Port speed
Ethernet MAC address
Radio and Wireless Settings
Operating mode
Wireless access point name
Country and region
Wireless communication
Wireless modes
Outdoor High Power Wireless N Access Point
Description
192.168.0.100
255.255.255.0
192.168.0.210 and 255.255.255.0
admin
Enabled
Disabled
Disabled
USA-Pacific
Enabled
Disabled
10/100/1000
See product label
Access point, infrastructure mode
netgearxxxxxx, where xxxxxx are the last 6 digits of the
wireless access point MAC address
Varies by region
2.4 GHz radio enabled
5 GHz radio enabled
11ng
11na
Supplemental Information
62