The Control Panel - Canon Image runner 5075 Easy Operation Manual

The Control Panel

The control panel consists of a touch panel display,
for setting the various functions, and physical
keys, such as the Start key, Stop key, and the
Control Panel Power Switch. The following is an
explanation of the keys used in this manual. For
more information, see Chapter 1, "Before You Start
Using This Machine," in the Support Guide or the
Reference Guide.
Reset Key
Press to restore the standard settings of the machine.
Touch Panel Display
Displays the settings screen for each function.
Display Contrast Dial
Use to adjust the brightness of the touch panel display.
To Confi rm or Edit the Job Status
Press [System Monitor]
to display the screen
on the left, enabling
you to confirm the job
status and cancel print
jobs. You can also
see the status of the
machine, such as the
amount of remaining
paper.
System Monitor Screen
5
To Switch Functions
Use these keys to swich functions
Press the keys on the upper part of the
touch panel display to switch functions
Help Key
Press to display explanations of functions and
how to specify settings.
If the Touch Panel Display is Turned Off
If nothing is displayed on the touch panel display even when the main
power switch is ON, follow the procedures below:
1 When
steady green light:
Press
2 When
Press the control panel power switch (B).
Ex. Send Basic Features Screen
1 2 3
4 5 6
7 8 9
0
Additional Functions Key
Press to specify additional functions.
The Control Panel
(Energy Saver) maintains a
(Energy Saver) (A).
(Energy Saver) is not lit:
3
6
Control Panel Power Switch
Press to turn the control panel ON or OFF.
Energy Saver Key
Press to set or cancel the Energy Saver mode.
Counter Check Key
Press to display the copy and print count totals on the
touch panel display.
Stop Key
Press to stop a job in progress, such as a scan job or
copy job.
Start Key
Press to start an operation.
Clear Key
Press to clear entered values and characters.
Numeric Keys
Press to enter numeric values.
Log In/Out Key
Press when setting or enabling Department ID
Management.
6