Advertisement
5-2-4 LCD Adjustment
5-2-4 (a) PREPARATION
Note :
1) The LCD adjustment is possible by using the each key of unit.
2) The value completed adjustment are stored at ICL 202(EPROM).
3) When finish adjustment, it is needed to off the power to store adjusted value.
4) After each adjustment step is completed, OSD shows "CONFIRM!".
1.How to select the LCD adjust mode.
STEP1
1. Connect the power (battery or power cable).
2. Switch to "PLAYER" mode.
3. Set OSD on state.
STEP2
1. Press and hold "FF" and "EJECT" buttons
on the unit for more than 3 ~ 4 seconds
simultaneously.
2. There is OSD on screen as below.
On screen display shows "A VCO EPR:XX
EVR:XX" LCD adjustment mode has suc-
cessfully been activated.
Note : "XX XX" indicates variable value.
CAMERA/VIDEO
SELECT SWITCH
Samsung Electronics
REW
PLAY/STILL
FF
BUTTON
BUTTON
BUTTON
Alignment and Adjustment
TV OSD
VCO
A
EPR : XX
EVR : XX
STOP
EJECT
BUTTON
BUTTON
5-25
Advertisement
