Alignment and Adjustment
The function keys left case is required to adjust the camera section.
ZERO RETURN
ZOOM LEVER : ZOOM TELE/WIDE
Note : In service adjustment mode, button names are different from those in customer camera function con-
trol mode. EX) MENU/ENTER button is the same as confirm.
5. How to get into service ÒADJUSTÓ mode
STEP 1
1. Remove the lithium battery from the camcorder.
2. Connect the power source (battery/DC cable).
3. Eject the tape if it is in the unit.
4. Set the power switch of the camcorder to "CAM-
ERA" position.
5. Set OSD on state.
STEP 2
1. Press and hold the "EJECT" button and "STOP"
button on the camcorder at the same time for
more than 5 seconds.
Then unit goes into service mode.
STEP 3
On screen display show "ODF. T.INI XX XX" CAM-
ERA ADJUSTMENT mode has successfully been
activated.
Note : When ÒXX XXÓ is shown in service adjustment procedures, this indicates variable values.
5-4
SELECT
EDIT
_
+
DSE
ON/OFF
COUNTER
RESET
DISPLAY
XDR/BLC
MENU
TITLE
ENTER
DATE/TIME
MODE UP
MODE DOWN
CONFIRM
DATA UP
DATA DOWN
Samsung Electronics