Advertisement
Alignment and Adjustment
5. AUTO IRIS
1) Camera ÒE-EÓ, 3100¡K gray-scale chart.
2) Video(output) jack and AF MICOM.
3) Connect video(output) jack to waveform moni-
tor input jack and monitor TV jack respectively.
4) Press the ÒTITLE (MODE UP)/DATE/TIME
(MODE DOWN)Ó button so that the
OSD state is ÒOCE. IRIS XX XXÓ.
5) Press ÒMENU/ENTER(CONFIRM)Ó Button.
6) Then, the micro process will work;
- IRIS open, IRIS control MAXIMUM Value
found.
- IRIS close, IRIS control minimum Value found.
- Store the MIN/MAX data to mode 0BE, 0BF
and mode 0A3, 0A4.
7) The OSD shows ÒO.KÓ.
H
Center of
white level
100IRE
Optical
black level
40US
6. Auto white balance
1) Camera ÒE-EÓ, 3100¡K/5100¡K gray-scale chart.
2) Video(output) jack and AF MICOM.
4) Connect vectorscope input jack to video(out-
put) jack.
3) Press the ÒTITLE (MODE UP)/DATE/TIME
(MODE DOWN)Ó button so that the OSD state
is ÒOCF. AWB XX XXÓ.
a. W/B Indoor
a-1. Aim the camera at a 3100¡K gray-scale chart
illuminated at 1500 to 2000 lx. (40us)
a-2. Press ÒMENU/ENTER(CONFIRM)Ó button
so that the white vector moves to the center
on screen of the vectorscope.
a-3. During the control W/B indoor, OSD shows
Ò0CF, AWB xx 01Ó.
The OSD shows ÒOK!Ó.
b. W/B Outdoor
b-1. Aim the camera at a 5100¡K gray-scale (or,
3100¡K+C16 filter) chart illuminated at 1500
to 2000 lx. (40us)
5-20
b-2. Press ÒMENU/ENTER(CONFIRM)Ó button
so that the white vector moves to the center
on screen of the vectorscope.
b-3. During the control W/B outdoor, OSD shows
Ò0CF, AWB xx 00Ó.
The OSD shows ÒOK!Ó.
b-4. Store the data to mode 053, 054, 055 and 056.
Match the white luminance
point with the
black luminance
point
Match the white luminance
point with the
black luminance
point
7. Pre white balance (I)
1) Camera ÒE-EÓ, 3100¡K gray-scale chart.
2) Video(output) jack and AF MICOM.
3) Connect vectorscope input jack to video(out-
put) jack.
4) Press the ÒTITLE (MODE UP)/DATE/TIME
(MODE DOWN)Ó button so that the
OSD state is Ò137. XX XX.Ó (R-Y axial)
5) Aim the camera at a 3100¡K gray-scale chart
illuminated at 1500 to 2000 lx.
6) Adjust the ÒEDIT + (DATA UP)/EDIT Ð (DATA
DOWN)Ó button so that the white vector moves
to the R-Y axial on screen of the
vectorscope.
Note : Bright dot shifts after the confirm button is
pressed.
Samsung Electronics
Advertisement
