Checking The Software Version; Printing A Test Label - Paxar Monarch series Operator's Handbook Manual

C h e c k i n g t h e S o f t w a r e V e r s i o n
To check the Software version of the printer, the Ultra Class library, the
scanner configuration, printer diagnostics, and the Application version:
1. Select the printer icon from status bar on the display.
2. Select About.
P r i n t i n g a T e s t L a b e l
To print a Test Label:
1. Select the printer icon from status bar on the display.
2. Select Printer Diagnostics.
3. Select Printer from the Printer Diagnostics menu.
4. Select Diagnostic Labels from the Printer Tests menu.
5. Select Diag Label from the Diagnostic Labels menu.
Note: As the test is performed successfully, "success" appears at the
top right-hand corner of the screen.
6-2 Troubleshooting