Loading For Non-Peel Mode - Paxar Monarch series Operator's Handbook Manual

Loading for Non-Peel Mode

To load supplies for non-peel mode:
1. Feed the supply under the applicator roller and over the label
deflector.
2. Close the supply cover.
3. Turn on the printer.
4. Select Load Supply from the printer icon menu, then select
Calibrate.
S e l e c t i n g t h e S u p p l y T y p e
To select the supply type:
1. Select the printer icon from the status bar.
Applicator Roller
Label Deflector
Using Supplies 3-5