Using Supplies; Loading Supplies - Paxar Monarch series Operator's Handbook Manual

U S I N G S U P P L I E S
The printer can use three types of supplies:
♦ Labels
♦ Tags
♦ Receipt Paper.
See "Selecting the Supply Type" in this chapter for more information.
There are two print modes. The way you load the supplies depends on
the print mode you use.
♦ Peel mode removes the backing paper from the supplies as it prints
the labels. This mode allows you to apply the label immediately. It is
only for labels. When using the on-demand sensor, you can press the
trigger to print a label or the next label prints automatically when the
previous one is applied to a product.
♦ Non-Peel mode does not remove the backing paper. It is for labels
printed in a continuous strip, tags, and receipt paper.
L o a d i n g S u p p l i e s
To load supplies:
1. Press the latch buttons and open the supply cover.
Cover
Latch Buttons
3

Using Supplies 3-1