Clearing Supply Jams; Storing The Printer - Paxar Monarch series Operator's Handbook Manual

C l e a r i n g S u p p l y J a m s
To clear a supply jam:
1. Turn off the printer.
2. Open the supply cover completely.
3. Open the label deflector by gently pressing down on it with two
fingers.
4. Remove the supplies. See "Removing Supplies" in Chapter 3 for
more information.
5. Carefully remove any jammed supply and close the deflector.
Note: Do not pull the jammed supply out through the front of the label
deflector. Do not use sharp objects to remove jammed supplies.
6. Carefully
remove any
jammed supply
between the
pinch and feed
rollers.
7. Clean any
adhesive build-
up, if necessary.
8. Reload the supplies and close the label deflector.
S t o r i n g t h e P r i n t e r
Do not store the printer in or near
♦ magnetic fields
♦ wet or damp areas
♦ dirty or dusty areas
♦ areas of intense vibration or shock.
5-6 Care and Maintenance
Feed Roller
(behind Pinch Roller)
Pinch Roller