Paxar Monarch series Operator's Handbook Manual page 20

4. Push the label deflector up until it snaps into place.
5. Partially close the cover to the first position.
6. Pull the backing paper over the guide roller, down to the pinch and
feed rollers.
7. Hold the backing paper edge between the feed and pinch rollers, and
press the trigger.
8. Close the cover.
9. Turn on the printer.
10. Select Load Supply from the printer icon menu, then select
Calibrate.
3-4 Using Supplies
Partially closed cover
Guide Roller
(behind
Feed Roller
(behind Pinch Roller)
Pinch Roller