Port Identity Examples; Sources For More Information - ProCurve 2610 Series Management And Configuration Manual

Getting Started

Sources for More Information

Note
1-4
ProCurve(config)# ip default-gateway 18.28.152.1/24
ProCurve(config)# vlan 1 ip address 18.28.36.152/24
ProCurve(config)# vlan 1 ip igmp

Port Identity Examples

This guide describes software applicable to both chassis-based and stackable
ProCurve switches. Where port identities are needed in an example, this guide
uses the chassis-based port identity system, such as "A1", "B3 - B5", "C7", etc.
However, unless otherwise noted, such examples apply equally to the
stackable switches, which for port identities typically use only numbers, such
as "1", "3-5", "15", etc.

Sources for More Information

For additional information about switch operation and features not covered
in this guide, consult the following sources:
For information on which product manual to consult on a given
■
software feature, refer to "Product Documentation" on page xvii.
For the latest version of all ProCurve switch documentation, including
release notes covering recently added features, visit the ProCurve
Networking website at www.procurve.com. Click on Technical support, and
then click on Product manuals.
■ For information on specific parameters in the menu interface, refer
to the online help provided in the interface. For example: