ProCurve 2610 Series Management And Configuration Manual page 303

N o t e
ProCurve Switch# show snmp-server
SNMP Communities
Community Name
---------------- -------- ------------
public
Trap Receivers
Link-Change Traps Enabled on Ports [All] : All
Send Authentication Traps [No] : No
Address
--------------------- --------------- ----------- ----------- ----- --------
15.28.333.456
Excluded MIBs
Snmp Response Pdu Source-IP Information
Selection Policy
Trap Pdu Source-IP Information
Selection Policy
Figure 13-10. Example Showing SNMP informs Option Enabled
If the sending agent does not receive an SNMP response back from the SNMP
Manager within the timeout period, the inform request may be resent, based
on the retry count value.
You must specify an IP address that will receive the notifications and the
community name.
The retries and timeout options are not used when using trap requests.
MIB View Write Access
Manager Unrestricted
Community
guest
: Default rfc1517
: Default rfc1517
Configuring for Network Management Applications
Using SNMP Tools To Manage the Switch
Events Sent Notify Type Retry Timeout
All inform 3 15
13-23