Configuring Ip Addressing; Overview - ProCurve 2610 Series Management And Configuration Manual

Configuring IP Addressing

Overview

8-2

Overview

You can configure IP addressing through all of the switch's interfaces. You can
also:
■ Easily edit a switch configuration file to allow downloading the file to
multiple switches without overwriting each switch's unique gateway and
VLAN 1 IP addressing.
Assign up to seven secondary IP addresses to a VLAN (multinetting)
■
Why Configure IP Addressing? In its factory default configuration, the
switch operates as a multiport learning bridge with network connectivity
provided by the ports on the switch. However, to enable specific management
access and control through your network, you will need IP addressing. Table
8-1 on page 8-12 shows the switch features that depend on IP addressing to
operate.