ProCurve 2610 Series Management And Configuration Manual page 199

ProCurve Switch
==========================- CONSOLE - MANAGER MODE -============================
Port Type
----- ---------
1 10/100TX
2 10/100TX
3 10/100TX
4 10/100TX
5 10/100TX
6 10/100TX
7 10/100TX
8 10/100TX
9 10/100TX
10 10/100TX
11 10/100TX
Back
Actions->
Return to previous screen.
Use up/down arrow keys to scroll to other entries, left/right arrow keys to
change action selection, and <Enter> to execute action.
Figure 10-1. Example of the Port Status Screen
N o t e
Status and Counters - Port Status
Intrusion
Alert Enabled
--------- -------
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
No Yes
Intrusion log
Using the Menu To Configure Ports.
The menu interface uses the same screen for configuring both individual ports
and port trunk groups. For information on port trunk groups, see Chapter 12,
"Port Trunking" .
1. From the Main Menu, Select:
2. Switch Configuration...
2. Port/Trunk Settings
Port Status and Basic Configuration
Viewing Port Status and Configuring Port Parameters
11-Sept-2007
Status Mode
------ ----------
Up 10FDx
Up 10FDx
Down 10FDx
Down 10FDx
Down 10FDx
Down 10FDx
Down 10FDx
Down 10FDx
Down 10FDx
Down 10FDx
Down 10FDx
Help
8:46:35
MDI Flow Bcast
Mode Ctrl Limit
----- ----- ------
0
MDI off
MDI off 10
0
MDI off
0
MDI off
0
MDI off
0
MDIX off
0
MDI off
0
MDI off
0
MDI off
MDIX off 0
0
MDI off
10-7