Note:
• The Sponge (of Fans) is not re-useable.
Please use a new one when Fan exchange.
7.26. Removal of C1-Board
1. Remove 2 screws ( ) of Side Angle (R).
2. Remove 6 screws ( ) and then remove the Reinforce-
ment Angle (A).
3. Remove 4 screws of the flexible cable.
4. Disconnect the connector (C14).
5. Remove the flexible cables from the connectors (CA1,
CA2, C11).
6. Remove 4 screws and then remove C1-Board.
7.27. Removal of C2-Board
1. Remove the Fan Block (A), (B).
(Refer to Removal of Fan)
2. Remove the Eye Bolt and Eye Bolt Cover.
3. Remove 5 screws and then remove the Rear Cover Angle
(A).
39
TH-103PF10WK/TK/RK