TH-103PF10WK/TK/RK
7.16. Removal of SU-Board
1. Remove the Side Angle (R).
(Refer to Removal of the Side Angle (L), (R) )
2. Remove 6 screws and then remove the Reinforcement
Angle (A).
3. Disconnect the Fan relay connectors.
4. Remove 4 screws and then remove the Fan Block (A),
(B).
5. Remove the flexible cables from the connectors (SU1,
SU2, SU3, SU4, SU55).
6. Disconnect the connector (SU45).
7. Remove 9 screws.
8. Slide the SU-Board to the upper direction to remove the
SU-Board from the connectors (SU41, SU42).
Take out so as not to damage SU-Board.
9. Slide the SU-Board to the bottom direction to remove the
SU-Board.
32