Remove The Contact Metal Bottom A; Remove The C1-Board; Remove The C2-Board; Remove The C3-Board - Panasonic TH-P55ST30S Service Manual

9.14. Remove the Contact metal bot-
tom A
1. Remove the screws (×15
metal bottom A.

9.15. Remove the C1-Board

1. Disconnect the flexible cables (CB1, CB2 and CB3).
2. Disconnect the flexible cable (C10).
3. Disconnect the connector (C14).
4. Remove the screws (×3

9.16. Remove the C2-Board

1. Remove the Stand bracket. (See section 9.13.)
2. Disconnect the flexible cables (CB4, CB5, CB6, CB7,
CB8 and CB9).
3. Disconnect the flexible cables (C20, C21 and C26).
4. Remove the screws (×4

9.17. Remove the C3-Board

1. Remove the Stand bracket. (See section 9.13.)
2. Disconnect the flexible cables (CB10, CB11, CB12,
CB13, CB14 and CB15).
3. Disconnect the flexible cables (C31, C33 and C36).
4. Disconnect the connector (C35).
5. Remove the screws (×4
) and remove the Contact
) and remove the C1-Board.
) and remove the C2-Board.
) and remove the C3-Board.
9.18. Remove the Chassis support
metals and the M8 nut metals
1. Remove the Stand bracket. (See section 9.13.)
2. Remove the screws (×3
sis support metal (L, R) and the M8 nut metal top (L, R).
3. Remove the screw (×1
metal bottom (L, R).

9.19. Remove the S-Board

1. Remove the screws (×2
unit.
2. Remove the screws (×2
3. Disconnect the connector (S10) and remove the S-Board
from the Power button bracket.
9.20. Remove the Contact metal bot-
tom B
1. Remove the Stand bracket. (See section 9.13.)
2. Remove the screws (×7

3. Remove the Contact metal bottom B.

26
each) and remove the Chas-
each) and remove the M8 nut
) and remove the S-Board
).
, ×9 , ×1
).