TH-58PF11EK
3. Remove 6 screws and then remove SS2-Board and SS3-
Board.
8.17. Removal of C1, C2, C3-Board
Removal of C1-Board
8.17.1.
1. Remove the Slot Block.
(Refer to Removal of Slot Block)
2. Remove 4 screws and then remove the Reinforcement
Angle (R).
3. Remove 10 screws and then remove the Heat-sinks.
4. Remove the flexible cables from the connectors (C10,
C11, CB1, CB2, CB3, CB4, CB5).
5. Remove 5 screws and then remove C1-Board.
Removal of C2-Board
8.17.2.
1. Remove the Slot Block.
(Refer to Removal of Slot Block)
2. Remove 3 screws and then remove the AC-Inlet Block.
3. Remove 10 screws and then remove the Heat-sinks.
4. Remove the flexible cables from the connectors (C20,
C21, C22, C26, CB6, CB7, CB8, CB9, CB10).
5. Remove 4 screws and then remove C2-Board.
24