Checking The Recording Time; To Pause The Recording; One Touch Copy - Dvd To Vhs - Sanyo HVR-DX625 Instruction Manual

DF-Q77E2D-HR-O

Checking the Recording Time

Total time and recorded time are displayed on the TV screen after pressing [DISPLAY]. Recorded time is
displayed on the front panel display.

To Pause the Recording

1
Press [PLAY/PAUSE] to pause the disc or tape during recording.
2
When you want to continue recording, press [PLAY/PAUSE] or [REC ( )] in DVD mode and press [REC ( )]
in VCR mode.
Note
• To quit One Touch Recording, press [STOP]. To confirm, select 'OK'. To cancel, select 'Cancel'.
• The DVD Recorder+VCR will automatically power off when One Touch Recording ends.
Tip (VCR mode only)
• Always use [PLAY/PAUSE] for best results when making changes during recording.
• You cannot record on the VCR deck and DVD deck at the same time.
• While the VCR is recording, DVD playback is possible. However, while the DVD is recording, all VCR functions are

One Touch Copy - DVD to VHS

If the DVD you are attempting to copy is copy-protected, you will not be able to copy
the disc. It is not permitted to copy Macrovision encoded DVDs.
1
Insert a Disc.
Insert the disc you wish to copy in the DVD deck and close the disc tray.
2
Insert a VHS Tape.
Insert a blank VHS videotape into the VCR deck.
3
Find the place on the DVD disc tape from which you want to start recording using the [PLAY/PAUSE], [FF] and
[REW] functions. And press [STOP].
4
Press [VCR
5
Press [ENTER] to select the desired Record Mode in 'Copy to Tape' menu:
• SP (Standard Play)
• LP (Long Play, 2 times SP).
6
Press [VCR
7
Stop the Copy Process
To stop copying at any time, press [STOP]. You must stop the Copy process manually when the DVD movie
ends, or the unit may replay and record over and over again.
If you want to start copy any point of disc
1.
2.
3.
Downloaded From Disc-Player.com Daewoo Manuals
2006.6.21 3:57 PM ˘ ` 39
For example: To change channels during recording, first press [PLAY/PAUSE] to put the unit in Pause mode. Then
select the desired channel on the DVD Recorder+VCR, and press [REC ( )] again to resume recording.
disabled.
DVD] on the front panel.
œ œ
œ œ DVD] again to start copying.
Find the place on the DVD (or Disc) from which you want to start recording using the [PLAY/PAUSE], [REW] and
[FF] functions.
Press [COPY] while DVD is in resume stop (» STOP) mode.
Follow the same procedure 5-7.
mac001 1200DPI 90LPI
Choose quality and
press COPY key:
LP
SP
Basic Recording
Copy to Tape
Stop
39