Recording; Recording & Otr (One-Touch Timer Recording) - Sanyo FWDV225F Owner's Manual

This unit has no tuner system so it cannot receive TV broadcasts without external tuner or such devices.
Note: You can also set the external tuner for timer recording. Refer to "Satellite
•
Link" on page 22.
You CANNOT dub a DVD to a video cassette tape.
•
Do not change the external tuner's channel while you are recording. You
•
CANNOT watch one channel and record another at the same time.
Recording & OTR (One-touch Timer Recording)
1
Press to turn on the unit.
Then insert a recordable tape.
Para encender la unidad, pulse
Luego inserte una cinta grabable.
2
You need to press
•
every time you operate any of
VCR features.
4
Press to select the desired tape speed.
Pulse para seleccionar la velocidad deseada
de la cinta.
Tape speed
Type of tape
SP mode
SLP mode
LP mode cannot be Recorded, LP mode can be
•
Played back.
Press repeatedly until
desired recording
duration is selected.
Pulse repetidamente hasta
que se seleccione la duración de
grabación deseada.
REC OTR (0:30)
(normal recording)
OTR (8:00)
6
To stop recording temporarily, press
Para detener la grabación temporalmente, pulse
During the recording in the pause mode, 5 C marks appear on
•
the TV screen. Each C mark represents 1 minute.
Press again to resume recording.
•
Pause mode will be automatically cancelled after 5 minutes to
•
prevent damage to the cassette tape and the video head.
20

RECORDING

RECORDING
B
ASIC RECORDING
.
Press to switch to the VCR mode.
Para cambiar al modo de VCR, pulse
first
Recording / playback time
T60 T120
1hour 2hours 2-2/3hours
3hours 6hours
5
REC
OTR (1:00).....
OTR (7:30)
.
3
Press until "L1" or "L2" is displayed
on the TV screen. Select "L1" to
activate rear input jacks. Select "L2" to
activate front input jacks.
Pulse hasta que se visualice "L1" o "L2"
en la pantalla de la TV. Seleccione "L1" para
activar los conectores posteriores de entrada.
Seleccione "L2" para activar los conectores
frontales de entrada.
Connect your external tuner to the L1 (rear panel) jacks of the
•
SP
unit. Connect camcorders and other such devices to the L2
(front panel) jacks. Refer to pages 8, 9.
T160
8hours
7
8
.
* Accidental Erasure Prevention
To prevent accidental
.
recording, remove erase-
protection tab of the cassette
tape. To record again, cover
the hole with adhesive tape.
How to set the timer recording or satellite link,
refer to pages 21-22.
Before: Turn on the TV.
TV
this unit
REC TIMER REC
REC
Press to stop recording.
Pulse para detener la grabación.
Press to eject the recorded cassette
tape.
Pulse para expulsar el casete grabado.
external tuner
VCR VCR DVD DVD D
TRACKING TRACKING SOURCE SOURCE
erase-protection tab
EN