Recording Options' Settings - Sanyo HVR-DX625 Instruction Manual

DF-Q77E2D-HR-O

'Recording Options' Settings

DVD Record Quality
You can set the default DVD recording quality to: HQ (High Quality - 1
hr/disc), SP (Standard Quality - 2 hrs/disc), EP (Extended Play - 4 hrs/disc) or
SEP (Very Low Quality - 8 hrs/disc).
1
Press [SETUP]. The Setup menu appears.
While 'Init Setup' is selected, press [ENTER] to go to the initial setup
page.
2
Use [œ/√] to select 'Recording Options
3
While 'Recording Options
4
Press [√] to move to the second level.
5
Use [.../†] to select the desired Record Quality (
6
Press [ENTER] to confirm your selection, then press [SETUP] to exit the menu.
VCR Record Quality
You can set the default VCR recording quality to SP (Standard Play) or LP
(Long Play). SP is higher quality, but LP provides 2 times the recording time;
e.g., a 2 hour tape will record for 4 hours in LP mode.
Follow the same procedure as the 'DVD Record Quality'.
Auto Chapter
During recording, chapter markers are added automatically at fixed
intervals.
You can set this interval to
But when you set DVD Record quality "SEP", Auto Chapter interval could be
set only '10 min' or '15 min'.
To turn off automatic chapter marking, select '
Follow the same procedure as 'DVD Record Quality'.
Overwrite
Immediately begins recording over the currently selected title.
20
Downloaded From Disc-Player.com Daewoo Manuals
2006.6.21 3:57 PM ˘ ` 20
' is selected, press [†] to select 'DVD Quality'.
5 min 10 min 15 min
, or
Off
mac001 1200DPI 90LPI
Recording Options
•DVD Quality
VCR Quality
Auto Chapter
Overwrite
...
œ √ Choose
†
'.
HQ SP EP SEP
, , or ).
Recording Options
DVD Quality
•VCR Quality
Auto Chapter
Overwrite
... Choose
œ √
†
Recording Options
DVD Quality
VCR Quality
.
•Auto Chapter
Overwrite
'.
œ √ ... Choose
†
Recording Options
DVD Quality
VCR Quality
Auto Chapter
Overwrite
œ √ ... Choose
†
Initial Setup
HQ
SP
EP
SEP
ENTER OK SETUP Exit
SP
LP
ENTER OK SETUP Exit
Off
05 min
10 min
15 min
ENTER OK SETUP Exit
•On
Off
ENTER OK SETUP Exit