Preferences' / Video Settings - Sanyo HVR-DX625 Instruction Manual

DF-Q77E2D-HR-O

'Preferences' / Video Settings

1
Press [SETUP]. The Setup menu appears.
While 'Init Setup' is selected, press [ENTER] to go to the initial setup
page.
2
Use [œ/√] to select 'Preferences
3
While 'Preferences
4
Press [√]. The 'Video' submenu is displayed.
TV Aspect Ratio
1
Use [.../†] to select 'TV Aspect' while the 'Video' submenu is
displayed.
2
Press [√] to go to the second level.
3
Use [.../†] to select the desired TV Aspect.
4
Press [ENTER] to confirm your selection.
5
Press [SETUP] to exit the menu.
4:3 PS :
Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen. Both
sides of the picture are cut off.
4:3 LB :
Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above and
below the picture.
16:9 :
Select when a 16:9 wide screen TV is connected.
TV Aspect can be used only for DVD disc playback. But some kinds of DVD discs doesn't support TV Aspect.
Video Output
Progressive Scan Video provides the highest picture quality with reduced
flickering.
Interlace or Progressive :
television (DTV) or Monitor using the COMPONENT jacks, set Video Output
to 'Interlace' or 'Progressive'.
RGB :
Not available for this set.
Follow the same procedure as TV Aspect Ratio to change the Video Output.
Caution
Once the Progressive Scan setting is entered, an image will only be visible on a Progressive Scan compatible TV or
monitor.
22
Downloaded From Disc-Player.com Daewoo Manuals
2006.6.21 3:57 PM ˘ ` 22
'.
' is selected, press [†] to select 'Video'.
If you connect the DVD Recorder+VCR to a digital
mac001 1200DPI 90LPI
Preferences
•Video
Audio
Parental Ctrl
Auto Settings
VCR
Modulator Out
... Choose
œ √
†
Preferences
Video
Audio
Parental Ctrl
Auto Settings
VCR
Modulator Out
...
œ √ Choose
†
Preferences
Video
Audio
Parental Ctrl
Auto Settings
VCR
Modulator Out
œ √ ... Choose
†
Initial Setup
TV Aspect 4:3 PS
Video Output Interlace
ENTER OK SETUP Exit
• TV Aspect 4:3 PS
Video Output 4:3 LB
16:9
ENTER OK SETUP Exit
TV Aspect
• Video Output Interlace
Progressive
RGB
ENTER OK SETUP Exit