Draytek Vigor2710 Series Quick Start Manual page 33

Below shows Wireless LAN>>WPS web page:
1. Check Enable WPS to enable WPS setting.
2. Click Start PBC to invoke Push-Button style WPS setup procedure.
The router will wait for WPS requests from wireless clients about two minutes. The
WPS LED on the router will blink fast when WPS is in progress. It will return to
normal condition after two minutes. (You need to setup WPS within two minutes).
3. Please input the PIN code specified in wireless client you wish to connect, and click
Start PIN button.
The WLAN LED on the router will blink fast when WPS is in progress. It will return
to normal condition after two minutes. (You need to setup WPS within two minutes)
25
Vigor 2710 Series Quick Start Guide