Interface
Description
Line
Connector for PSTN life line.
Phone
Connector of analog phone for VoIP communication
Factory Reset
Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press
the hole and keep for more than 5 seconds. When you see the ACT LED begins to
blink rapidly than usual, release the button. Then the router will restart with the
factory default configuration.
PWR
Connector for a power adapter.
Power Switch.
ON/OFF
Interface
Description
Press the button once to enable (WLAN LED on) or
WLAN
disable (WLAN LED off) wireless connection.
DSL
Connector for accessing the Internet through
ADSL2/2+.
LAN (1-4)
Connectors for local networked devices.
USB
Connector for USB storage (Pen Driver/Mobile
HD) or printer.
9
.
Vigor 2710 Series Quick Start Guide