Door Gasket Replacement; Optional F-1 Blower Wiring Diagram - Vogelzang International VG820E Owner's Manual

SERVICE HINTS continued...
firing which runs the risk of igniting structural elements
around the stove and chimney.
The most common experience is that of insufficient
draft. Under insufficient draft conditions, the fire will be
starved for oxygen, improper or incomplete combustion
occurs resulting in smoke spillage into the area around
the stove. A fire that is starved for oxygen will not burn
well. Such a fire will produce excessive smoke that will
cool and condense in the chimney creating creosote.
Excessive amounts of creosote buildup can ignite
causing a chimney fire with the possibility of structural
elements igniting as well.
Correct any draft related issues before using the
stove. Please note that one or more factors may play
a role in a draft issue and certain factors may change
over time as conditions vary.
NOTE: A DRAFT READING OF 0.05˝ TO 0.06˝
W.C. (WATER COLUMN) IS REQUIRED FOR
PROPER BURNING OF THIS STOVE. THE
MAXIMUM FLUE COLLAR DRAFT SHOULD NOT
EXCEED 0.06"W.C.
WIRING DIAGRAM F-1 BLOWER OPTION
DANGER: SHOCK HAZARD. DISCONNECT
POWER SOURCE BEFORE INSTALLATION
AND WHENEVER SERVICING BLOWER
ASSEMBLY.
CAUTION: MOVING PARTS CAN
CAUSE INJURY. DO NOT OPER-
ATE WITH COVER REMOVED.
Page 16
/ VG820E HEARTWOOD™

Door Gasket Replacement

CAUTION: DO NOT OPERATE A STOVE THAT IS
MISSING DOOR GASKET MATERIAL. OVER FIR-
ING AND UNSAFE OPERATING CONDITIONS
MAY RESULT.
Procedure:
1. Ensure appliance is not in operation and is thor-
oughly cooled.
2. Remove old door gasket and clean channel.
3. Using an approved, high temperature gasket
cement, apply a thin coat in bottom of channel.
4. Starting at hinge side of door, work gasket into
channel around door unit, end butt and trim to
length.
5. Close door and allow three to four hours for cement
to set before firing appliance.
NOTICE: ANY REPLACEMENT WIRING
MUST HAVE EQUIVALENT INSULATION
AND TEMPERATURE RATING (105°C).
VGZ-010 / 20120105.0