Useful Functions For Optimum Sewing - Brother KE-430FX Basic Operation Manual

2. USEFUL FUNCTIONS FOR OPTIMUM SEWING

2. USEFUL FUNCTIONS FOR OPTIMUM SEWING
The thread nipper device prevents the thread from pulling out at the
sewing start (-03, -0K, -0F specifications).
Page 31
This is used to stop the thread from pulling out at the sewing start, and at
times when skipped stitches might easily occur.
* The default setting for this memory switch is "OFF".
2
Original programs can be set easily using the
panel
Patterns, X-scale, Y-scale, sewing speed, slow start
pattern and upper thread tension can be recorded
into programs.
When a program number is selected, the program
which has been set for that number can then be
sewn.
To create a program with parameters that are
almost exactly the same as those of another
program, you can copy the original program and
change just the parts which need to be changed.
Correcting the upper thread tension can be
done easily
<A. Basic method of use>
The changes made at this time will be reflected in
each program, so this is a useful way of changing
programs while checking actual sewing.
<B. Overall correction>
This function is useful if you would like to change
the tension values for all programs at once.
This is used to stop the thread from pulling out at the
sewing start, and at times when skipped stitches might
easily occur.
The starting-up speed at the sewing start can be
adjusted easily.
KE-430FX/KE-430FS, BE-438FX
Page 36
Copying programs can be done easily
Page 40
Page 43
Slow start pattern setting is easy
Page 39
3186B