Brother KE-430FX Basic Operation Manual page 26

4. INSTALLATION
< Motor P. C. board >
2290B
18
Connectors
Upper shaft motor [4-pin]
Synchronizer [10-pin]
Operation panel [4-pin]
2291B
KE-430FX/KE-430FS, BE-438FX
Lock the cord clamps
(2) and (4) securely.
Connection location on
motor P. C. board
（UVW）
P11（SYNC）
P3 (PANEL)
5. Close the cord presser plate (2) in the direction of the white
arrow, and secure it by tightening the two screws (1).
NOTE:
Close the cord presser plate (2) securely so that no
foreign objects, insects or small animals can get inside the
control box.
6. Check that the cords do not get pulled, and then gently return
the machine head to its original position.
Cord clamps/
cable ties
(4)
(2) (3)
(2) (3)