Paper Tray Capacity - Brother DCP-L8400CDN Basic User's Manual

Paper Tray Capacity

Multi-purpose tray
(MP tray)
Standard paper tray
(Tray 1)
Optional lower tray
(Tray 2)
1
Folio size is 215.9 mm  330.2 mm.
2
Load only one sheet of Glossy in the MP tray
Recommended paper specifications
The following paper specifications are appropriate for this machine.
Basis weight
Thickness
Roughness
Stiffness
Grain direction
Volume resistivity
Surface resistivity
Filler
Ash content
Brightness
Opacity
Use plain paper that is appropriate for laser/LED machines to make copies.

 Use paper that is 75 to 90 g/m
 Use long grain paper with a neutral Ph value, and a moisture content of approximately 5%.
 This machine can use recycled paper that meets DIN 19309 specifications.
Paper size
Width: 76.2 to 215.9 mm
Length: 127 to 355.6 mm
A4, Letter, Legal,
B5 (JIS), Executive, A5,
A5 (Long Edge), A6,
1
Folio
A4, Letter, Legal,
B5 (JIS), Executive, A5,
1
Folio
2
75-90 g/m
80-110 m
Higher than 20 sec.
3
90-150 cm /100
Long grain
9 11
10e -10e ohm
9 12
10e -10e ohm-cm
CaCO (Neutral)
3
Below 23 wt%
Higher than 80%
Higher than 85%
2
.
Paper types
Plain paper, Thin paper,
Thick paper,
Thicker paper,
Recycled paper,
Bond paper, Labels,
Envelopes, Env. Thin,
Env.Thick and Glossy
2
Paper
Plain paper, Thin paper
and Recycled paper
Plain paper, Thin paper
and Recycled paper
Loading paper
No. of sheets
up to 50 sheets
2
(80 g/m )
3 Envelopes
1 Glossy paper
up to 250 sheets
2
(80 g/m )
up to 500 sheets
2
(80 g/m )
31
2
2
2