Brother DCP-L8400CDN Basic User's Manual page 31

c
Load paper in the MP tray and make
sure:
 The paper stays under the maximum
paper tab (1).
 The top edge of the paper is
positioned between the
arrows (2).
 The side to be printed on must be
face up with the leading edge (top of
the paper) in first.
 The paper guides touch the sides of
the paper so it will feed correctly.
1
NOTE
When you are using glossy paper, put only
one sheet at a time in the MP tray to avoid
a paper jam.
d
Lift up the support flap to prevent paper
from sliding off the face-down output
tray, or remove each page as soon as it
comes out of the machine.
and
e
Send the print job to the machine.
2
Loading paper
2
23