Bosch FAP-DO420 Operation Manual page 30

30 en | Accessories
FME-TESTIFIRE Multi-Stimulus Testing Tool
The FME TESTIFIRE is the first functional test tool for
optical and ionization fire detectors, heat detectors
(fixed temperature and rate-of-rise), carbon monoxide
(CO) detectors, as well as multi sensor detectors and
multi criteria detectors. Testing stimuli (heat, smoke,
and carbon monoxide) are created without using
pressurized aerosol cans or hazardous media. Testing
stimuli are generated at the time of test using safe and
patented processes fuelled by replaceable capsules.
FME-TS3 Smoke Capsule
Smoke Capsule for FME-TESTIFIRE testing tool
FME-TC3 CO Capsule
CO Capsule for FME-TESTIFIRE testing tool
SOLO100 Telescopic Access Pole
The SOLO100 Telescopic Access Pole is used to install
and replace fire detectors on high ceilings. It can be
extended by three SOLO101 Fixed Extension Poles.
The telescopic access pole is suitable for applications in
high-voltage environments and was tested at a voltage of
20 kV in line with BS EN 61235 Part 12.
Length: 1 m to 3.4 m
SOLO101 Fixed Extension Pole
The SOLO101 Fixed Extension Pole is used to install and
replace fire detectors on ceilings.
It can be used on its own, with up to three other fixed
extension poles or with the SOLO100 Telescopic Access
Pole.
Length: 1 m
SOLO610 Test Equipment Bag
The SOLO610 Test Equipment Bag is made from strongly
woven polyester with a PVC coating and is suitable for
carrying or storing test and service products.
F.01U.003.448 | 8.0 | 2011.10 Operation Guide
Automatic Fire Detectors LSN improved
Bosch Sicherheitssysteme GmbH
version