Ethernet Connections - Russound DMS-3.1 Installation Manual

ETHERNET CONNECTION
The DMS-3.1 requires an Ethernet connection to the same Local Area Network
(LAN) on which reside any AirPlay sources and if used, any DLNA / UPnP Media
servers and C-Series controllers. This permits the devices to communicate
to deliver content, metadata, and control data. Internet access on the LAN is
required for streaming content from any online services.
10
The DMS-3.1 requires a DHCP enabled router to obtain its IP address on the
LAN as it does not directly support confi guration of a static IP address. The LAN
must support a minimum of 10/100 BASE-T Ethernet and is recommended to
have a fi rewall enabled for security purposes. A standard CAT5 Ethernet patch
cable that is terminated with RJ45 ends in a straight through arrangement is
used to connect the DMS-3.1 to the network.
Ethernet connection to network
Russound DMS-3.1 Installation Manual