Automatically Connect A Bluetooth; Device - Volvo SENSUS Infotainment Manual

Method 1: search for the external
device using the infotainment system's
menus
1. Make the external device discoverable/
®
visible using its Bluetooth function. Refer
to the device's user's guide if necessary
or go to www.volvocars.com.
2. From the telephone's normal view, press
OK/MENU and select Search new
phone Search new
(for media players,

device

).
> The infotainment system will now
®
search for Bluetooth devices that are
in range, which may take up to
1 minute.
®
3. Select a Bluetooth
device from the list
and press OK/MENU.
4. Be sure that the code displayed in the
device is the same as the one shown on
the infotainment screen. If so, accept the
code in both places.
5. From the cell phone, accept or reject any
choices regarding its phone book and
messages.
> The external device is now paired to
the infotainment system.
If this method has not succeeded, press EXIT
and pair the device using method 2.
Method 2: search for the vehicle using
the external device's Bluetooth
function
1. From the telephone's normal view, press
OK/MENU and select Make car
discoverable
. Confirm by pressing OK/
MENU.
®
2. Search for Bluetooth
devices (i.e., the
infotainment system) from the external
device, which may take up to 1 minute.
3. Select the vehicle's name on the external
device's screen.
4. Be sure that the code displayed in the
device is the same as the one shown on
the infotainment screen. If so, accept the
code in both places.
5. From the cell phone, accept or reject any
choices regarding its phone book and
messages.
> The external device is now paired to
the infotainment system.
When the external device has been paired
®
and selected, its Bluetooth name will appear
on the infotainment system's screen and the
device can be controlled from the vehicle.
Related information
•
Infotainment - operating the system
(p. 26)
•
Connecting and disconnect a Bluetooth
device (p. 56)
03 Infotainment

Automatically connect a Bluetooth

device
®
When a Bluetooth
the infotainment system, it will automatically
be connected when the ignition is switched
on.
®
When Bluetooth
recently connected device is within range, it
will be connected automatically. If this device
is not within range, the system will attempt to
connect another previously paired device.
To connect a different paired device, press
EXIT, select to connect a new device or
switch to another Bluetooth device.
Related information
•
Infotainment - operating the system
(p. 26)
•
Connecting and disconnect a Bluetooth
device (p. 56)
®
®
®
device has been paired to
is active and the most
®
59
03