Reassemble And Reinstall Cleaning Head - iRobot Scooba Owner's Manual

Reassemble and Reinstall Cleaning Head

Follow these steps to reassemble and reinstall the cleaning head:
1
Open the Roller Brush Cover and
reinsert the roller brush.
3
To reinstall the cleaning head, push down on
the cleaning head until it snaps into place.
To extend Scooba's battery life and keep it cleaning at peak performance:
• Keep Scooba plugged in when not in use.
• Recharge Scooba as soon as possible, as waiting several days can
damage the battery.
• For long-term storage, charge the battery and then remove and store
it in a cool, dry place.
2
Close the Roller Brush Cover and
snap it into place.
Place the tank back on Scooba.
Wipe down Scooba's exterior
with a damp cloth to remove dust.
Scooba 400 Series Owner's Manual
EN
27