Table of Contents
Advertisement
PART 1 • English
2. Tv SCART
3. S/PDIf COAx
4. Power Cord
2.3 Remote Control unit
1. q
2. !
3. 0~9
4. fAv
5. RECALL
6. AuDIO
7. SubTITLE
8. INfO
9. MENu
10. EPG
11. ExIT
12. pq
13. OK
14. tu
15. TExT
16. 2
17. COLOuRED buTTONS
18. Tv/RADIO
2.4 Default PIN code: 0000
2.5 Installing the batteries
Remove the battery cover from the remote control and put 2xAAA size batteries inside the compartment.
The diagram inside the battery compartment shows the correct way to install the batteries.
1. Open the cover
2. Install batteries
3. Close the cover
To connect to your TV set using a SCART cable.
To connect to the input of your digital audio amplifier.
Your receiver requires a mains voltage of 100~240 V AC (Auto-
selectable), 50/60 Hz ±5%. Make sure to check the power specification
before connecting your receiver to the wall outlet.
Turns the receiver On/Stand-by
Mutes audio output of the receiver
Changes channel and controls numeric functions
Opens the available favourite list if previously configured
Toggles between the two the last watched channels
Opens the audio language(s) and mode selection.
Opens the subtitle language(s) selection
Shows the information banner
Displays the main menu and returns to the previous level of menu
Opens the EPG (Electronic Program Guide) in TV mode.
Exits from any menu and sub-menu or cancels the
progressing function
Switches to the previous/next program in TV mode. Moves the cursor
upwards/downwards in menu mode
In TV mode it displays the channel list according to the chosen mode.
In menu mode activates the highlighted menu item.
Increases/decreases the volume level in TV mode. Changes settings
for specific menu items in menu mode
Opens the Teletext language(s) selection
Freezes your live audio and video, press again to cancel
For Teletext and further menu functions
In viewing mode toggles between TV and radio mode
Fig. 3
Fig. 5
5
Advertisement
Table of Contents
