Timer; Alarm - Nike HRM TRIAX 15 Instructions Manual

14
In DATA mode you can recall timing and heart rate data for lap
and split times.
Resetting the chronograph erases all data.
The HRM Triax 15 has a 15 lap memory.
VIEW DATA POINTS
Press LAP/PLUS repeatedly.
The following information is displayed: Lap and split
times, best lap and average lap time.
TIMER mode features a 2-segment countdown timer. You can
use this as an interval training tool by exercising at a higher
intensity for a certain period of time, followed by a recovery
interval at a lower intensity level.
You can set up to 2 timed segments for your workout. As
each timer segment is completed the next begins. Set unused
segments to zero.
SELECT A TIMER
Press SPLIT/MINUS.
The selected timer will be the first to count down.
SET THE TIMERS
Follow directions in Making Adjustments to Mode Settings to set each
countdown timer.
START THE COUNTDOWN TIMER
1. Set one or two segments.
2. Press SPLIT/MINUS to advance to the segment you want to start
with.
3. Press LAP/PLUS.
Countdown begins. When the countdown reaches zero, the timer beeps,
and the countdown begins for the next segment. The number of
completed timer cycles appears below the countdown display.
DATA MODE

TIMER

In ALARM mode you can set an alarm that will sound for 20
seconds, or until any button is pressed.
NOTE: When the countdown is complete for both segments, the cycle repeats. For
example, when segment 1 is completed, segment 2 will begin. Segment 1 will begin at the
completion of segment 2.
STOP THE TIMER DURING COUNTDOWN
Press SPLIT/MINUS.
RESET TIMER
When timer is stopped, press ADJUST/EXIT.
Display returns to the original starting point.

ALARM

SET THE ALARM
See Making Adjustments to Mode Settings.
Note: The alarm is active only in the time zone for which it is set.
TURN THE ALARM ON AND OFF
Press LAP/PLUS.
The word ON toggles off and on each time you press the button.
15