Getting Started - Nike HRM TRIAX 15 Instructions Manual

4
We've tried to make this watch as easy as possible to use. Great care has
been taken to make the button functions consistent and clear. Even if you
don't read the whole manual, you should be able to work your watch if you
understand, in general, how the buttons work.
BUTTON FUNCTIONS, LEFT SIDE
ADJUST/EXIT
Think of ADJUST/EXIT as the button to use when you want to adjust, set or
reset something. For example, if you want to adjust the time, or reset the
chronograph. This button is a little different than the other buttons
because you usually have to press and hold it for a few seconds. This is so
you don't accidentally reset or adjust something.
MODE/NEXT
The MODE/NEXT button will normally move you to the next mode. When
you are making adjustments or setting something, the MODE/NEXT button
will move you to the next adjustable element.
ADJUST/EXIT
MODE/NEXT

GETTING STARTED

LAP/PLUS
SPLIT/MINUS
ELECTROLITE
BUTTON FUNCTIONS, RIGHT SIDE
The buttons on the right hand side of the watch have more functions than
the buttons on the left side. For that reason we've included all the details
for quick reference.
LAP/PLUS
You can think of the LAP/PLUS button as the "go", "plus," or "move
forward" button. It also functions as an on/off switch in some modes.
• In TIME mode, press to turn the chime on and off.
• In CHRON mode, press to start the chronograph and mark lap
completion.
• In TIMER mode, press to start the countdown timer.
• In PULSE mode, press to view time of day.
• In DATA mode, press to move forward through the list of data points.
• In ALARM mode, press to turn the alarm on and off.
• When making adjustments, press to advance the blinking element.
SPLIT/MINUS
The SPLIT/MINUS button is the opposite of the LAP/PLUS button. Think of it
as the "stop," "minus," or "go backwards" button. This button will also
allow you to alternate selections in some modes.
• In TIME mode, press and hold to select time zone 1 or 2.
• In CHRON mode, press to stop the chronograph.
• In TIMER mode, press to stop the countdown timer.
• When making adjustments, press to advance the blinking element.
ELECTROLITE BUTTON
The ELECTROLITE button is used to turn on the light.
If you press and hold the Electrolite button, you can make the light come
on at the press of any button. It's great for night use. We call it auto-
Electrolite.
5