Chronograph - Nike HRM TRIAX 15 Instructions Manual

12
In GRAPH mode you can view a graphic representation of your
heart rate over a period of time which you determine. This
feature provides you with a quick and simple view of your
heart rate trend.
The bar graph can represent up to 28 data points. If you set a
sample time of 1 minute, the bar graph can show your heart
rate over the last 28 minutes. You can set a sampling time
from 10 seconds to 10 minutes.
The value of each bar in the graph represents your heart rate
at the beginning of each sample time.
RESET THE BAR GRAPH
The bar graph will display your heart
rate as soon as the watch begins receiving a signal. You
may want to reset the bar graph at the very beginning
of an exercise session.
Press and hold ADJUST/EXIT until the bar graph
disappears.
DETERMINE SAMPLING INTERVAL
In order to adjust the sampling time you must first
reset the bar graph. Press and hold ADJUST/EXIT until
the bar graph disappears. Continue to hold ADJUST/EXIT
as "HOLD to SETUP" is displayed.
Follow directions in Making Adjustments to Mode
Settings to select the sample time.
GRAPH MODE
GRAPH DISPLAY
Example of the bar graph
display.

CHRONOGRAPH

In CHRONOGRAPH mode you can view heart rate, and
measure and record lap and split times. Recorded data is
accessed in DATA mode.
Lap and split times are displayed simultaneously.
Lap time is the time required to go once around a track, or
complete a segment of a run.
Split time is the total time from the beginning of the run.
START MEASURING A LAP
Press LAP/PLUS
MARK LAP COMPLETION AND START NEXT LAP
MEASUREMENT
Press LAP/PLUS.
Lap/split time appears for 5 seconds, then the display returns to the
overall time.
STOP TIME MEASUREMENT
Press SPLIT/MINUS.
The counting stops. The lap time and total elapsed time appear.
RESTART TIME MEASUREMENT
Press LAP/PLUS.
The counting continues.
RESET CHRONOGRAPH
Data in DATA mode will be erased when chronograph is reset.
The chronograph must be stopped to reset. If the chronograph is running
press SPLIT/MINUS.
Press and hold ADJUST/EXIT for 2 seconds. "HOLD to CLEAR" is displayed.
The chronograph resets.
13