Table of Contents
Advertisement
S
S
UPER
ERVER 5015B-M3 User's Manual
1-3
Server Chassis Features
The following is a general outline of the main features of the SC813MTS-280C
chassis.
System Power
When confi gured as a SuperServer 5015B-M3, the SC813MTS-280C chassis in-
cludes a single 300W power supply.
SAS/SATA Subsystem
For the 5015B-M3, the SC813MT-300 chassis was designed to support four SAS
or SATA hard drives, which are hot-swappable units.
Note: The operating system you use must have RAID support to enable the hot-
swap capability of the SAS drives (no system-based RAID for SATA).
Control Panel
The SC813MTS-280C's control panel provides important system monitoring and
control information. LEDs indicate power on, network activity, hard disk drive activ-
ity and system overheat conditions. The control panel also includes a main power
button and a system reset button. The front of the SC813MTS-280C also includes
a COM port and two USB serial ports for easy access.
Rear I/O Panel
The SC813MTS-280C is a 1U rackmount chassis. Its I/O panel provides one PCI
motherboard expansion slot, one COM port (another is internal), two USB ports,
a parallel (printer) port, PS/2 mouse and keyboard ports, a VGA port and two Gb
Ethernet ports.
Cooling System
The SC813MTS-280C chassis has an innovative cooling design that features three
4-cm high-performance system cooling fans. Each of these fans plug into a chassis
fan header on the motherboard. An air shroud channels the airfl ow generated by
the fans to effi ciently cool the processor area of the system.
A fan speed control setting in BIOS allows fan speed to be determined by system
temperature [the recommended setting is 3-pin (Server)].
1-4
Advertisement
Table of Contents
