CNR-SW2 Manual v1.0
Canyon NavMaster
Features
Altimeter
Altitude Measuring Range : -500 to 9000 meter or -1,600 to
29500 feet
Resolution of 0.5 meter or 1 feet
Total Altitude Gain
Trip timer : 9 hr 59 min 59 sec
Current ascending or descending Speed
Average ascending or descending Speed
Electronic Compass
3-mode display showing a compass arrow direction, numeric
and cardinal readouts
with highly accuracy of +-5 degree and a resolution of 1
degree
a magnetic distortion alerts "Err" when external magnetic
interference occurs
automatic shut-off
Thermo Alarm Clock
Perpetual calendar with day of week
Thermometer (-10 degree
to + 50 degree
12/24 hr,
selectable
Max/Min memory for Thermometer
Battery Installation
Computer Watch
Remove the back cover of the computer with a screwdriver, install
the 3.0V-battery with the positive(+) pole facing up and replace the
cover. Remove the battery and reinsert it if the LCD displays
irregular figures. This will clear and restart the computer's
microprocessor.
3V-Battery CR2032
Display Icons & Keys Illustration
)
Icons:
Heading Direction
Time mode
Alarm ON / OFF
Afternoon
Alarm Snooze
Temperature in Celsius
Battery Low
Temperature in Fahrenheit
Compass mode
Maximum memory
Altimeter mode
Minimum memory
To wake Up and set your computer
Press and hold both button A and C until all segments on.
Meter / Feet Selection
Right after all segments on, the "M" digit will start to flicker.
To select M (Meter) or Ft (Feet), press button C and then press
button A to confirm.
Selection
Right after Meter/Feet selection, the Celsius digit will then
start to flicker
To select
or , press button C and then press button A to
confirm.
Clock Setting
Right after
selection, the "24H" digits will then start to
flicker, press button C to select 12H or 24H hour format
Press button A to confirm and then the hour digits will start to
flicker.
Need help?
Do you have a question about the NavMaster CNR-SW2 and is the answer not in the manual?
Questions and answers