Add Ringing Tones For Contacts; Create Contact Groups; Remove Members From A Group - Nokia N90 User Manual

new numbers to the fixed dialling list, select
New SIM contact. You need the PIN2 code for these
functions.
When you use Fixed
not possible, except when sending text messages over a
packet data connection. In this case, the message centre
number and the recipient's phone number must be
included on the fixed dialling list.
When fixed dialling is activated, calls still may be possible
to the official emergency number programmed into your
device.

Add ringing tones for contacts

When a contact or group member calls you, the phone
plays the chosen ringing tone (if the caller's telephone
number is sent with the call and your phone recognises it).
1 Press to open a contact card, or go to the groups
list, and select a contact group.
2
Select Options
opens.
3
Select the ringing tone you wish to use for the
individual contact or the selected group.
To remove the ringing tone, select
list of ringing tones.
36 Copyright © 2005 Nokia. All rights reserved.
Options
dialling, packet data connections are
> Ringing tone. A list of ringing tones
Default tone
>

Create contact groups

Options in the groups list view are Open,
Delete, Rename,
Settings, Help, and Exit.
1
In Contacts, press
2 Select Options
3 Write a name for the group or use the default name
Group %N, and select OK.
4
Open the group, and select
5
Scroll to a contact, and press
multiple members at a time, repeat this action on all
the contacts you want to add.
6 Select OK to add the contacts to the group.
To rename a group, select
new name, and select OK.

Remove members from a group

1
In the groups list, open the group you want to modify.
2
Scroll to the contact, and select
from group.
3
Select Yes
Tip! To check to which groups a contact belongs,
from the scroll to the contact, and select
groups.
Ringing tone, Memory
to open the groups list.
> New group.
Options >
to mark it. To add
Options > Rename, enter the
Options
to remove the contact from the group.
Options
New group,
details,
Add members.
> Remove
> Belongs to