Write Text; Traditional Text Input - Nokia N90 User Manual

your service provider. For available topics and relevant
topic numbers, contact your service provider. In the main
view of Messaging, select Options
the main view you can see the status of a topic, a topic
number, name, and whether it has been flagged (
follow-up.
Options in Cell broadcast
Unsubscribe, Hotmark/Remove
Settings, Help, and Exit.
Cell broadcast messages cannot be received in UMTS
networks. A packet data connection may prevent cell
broadcast reception.

Write text

Traditional text input

and indicate the selected case.
that the first letter of the word is written in uppercase, and
all other letters are automatically written in lowercase.
indicates number mode.
The indicator is shown on the top right of the display
when you are writing text using traditional text input.
• Press a number key (
desired character appears. There are more characters
available for a number key than are printed on the key.
> Cell broadcast. In
) for
are Open, Subscribe/
hotmark, Topic,
means
— ) repeatedly until the
• To insert a number, press and hold the number key.
• To switch between letter and number mode, press and
hold .
• If the next letter is located on the same key as the
present one, wait until the cursor appears (or press
to end the time-out period), and enter the letter.
• To erase a character, press
clear more than one character.
• The most common punctuation marks are available
under . Press repeatedly to reach the desired
punctuation mark.
Press to open a list of special characters. Use
to move through the list, and press
character.
• To insert a space, press
next line, press three times.
• To switch between the different character modes,
press .
Predictive text input—Dictionary
You can enter any letter with a single key press. Predictive
text input is based on a built-in dictionary to which you
can also add new words. When the dictionary becomes
full, the latest added word replaces the oldest.
Copyright © 2005 Nokia. All rights reserved.
. Press and hold to
Select to select a
. To move the cursor to the
59