Connection Manager; View Data Connection Details - Nokia N90 User Manual

Connection manager

You may have multiple data connections active at the
same time when you are using your device in GSM and
UMTS networks. Press , and select
mgr. to view the status of multiple data connections, view
details on the amount of data sent and received, and end
connections. When you open
following:
• Open data connections: data calls (
data connections ( ) or ( ).
• The status of each connection
• The amount of data uploaded and downloaded for each
connection (shown for packet data connections only)
• The duration of each connection (shown for data calls
only)
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To end a connection, scroll to a connection, and select
Options > Disconnect.
To close all currently open connections, select
Disconnect all.
Connect. > Conn.
Conn. mgr., you can see the
) and packet
Options >

View data connection details

Options in the Conn. mgr.
are one or more connections are Details, Disconnect,
Disconnect all, Help, and Exit.
To view the details of a connection, scroll to a connection,
and select Options > Details.
Name—The name of the Internet access point (IAP) in use,
or the modem connection name if the connection is a
dial-up connection.
Bearer—The type of data connection:
GSM, or Packet data.
Status—The current status of the connection:
Connecting, Conn.(inact.), Conn.(active),
Disconnctng., or Disconnected.
Received—The amount of data, in bytes, received to your
device.
Sent—The amount of data, in bytes, sent from your device.
Duration—The length of time that the connection has
been open.
Speed—The current speed of both sending and receiving
data in kilobytes per second.
Dial-up—The dial-up number used.
Name—Access point name used.
Copyright © 2005 Nokia. All rights reserved.
main view when there
Data call, High sp.
On hold,
97