Remote Synchronisation; Create A New Synchronisation Profile - Nokia N90 User Manual

Shared (not shown if the connection is not shared)—The
number of applications using the same connection.

Remote synchronisation

Press , and select
to synchronise your notes, calendar, and contacts with
various calendar and address book applications on a
compatible computer or on the Internet.
The synchronisation application uses SyncML technology
for synchronisation. For information on SyncML
compatibility, contact the supplier of the calendar or
address book application you want to synchronise your
phone data with.
You may receive syncronisation settings in a special text
message. See 'Data and settings', p. 64.

Create a new synchronisation profile

Options in the
New sync profile,
Set as default, Help, and Exit.
1 If no profiles have been defined, your device asks if you
want to create a new profile. Select Yes.
98 Copyright © 2005 Nokia. All rights reserved.
Connect. > Sync. Sync enables you
Sync main view are Synchronise,
Edit sync profile, Delete, View
To create a new profile in addition to existing ones,
select Options >
you want to use the default setting values or copy the
values from an existing profile to be used as the basis
for the new profile.
2
Define the following:
Sync profile name—Write a descriptive name for the
profile.
Data bearer—Select the connection type: Web, or
Bluetooth.
Access point (shown only if
Web)—Select an access point to use for the data
connection.
Host address—The IP address of the host server.
Contact your service provider or system administrator
for the correct values.
Port (shown only if
Contact your service provider or system administrator
for the correct values.
User name—Your user ID for the synchronisation
server. Contact your service provider or system
administrator for your correct ID.
Password—Write your password. Contact your service
log,
provider or system administrator for the correct value.
Allow sync requests—Select
the server to start a synchronisation.
New sync profile. Choose whether
Data bearer is set to
Data bearer is set to Web)—
Yes if you want to allow