Toshiba Satellite 1700 Series Maintenance Manual page 123

3 Tests and Diagnostics
C8h = AC power plug-out
C9h = IR toggle
Cah = Undock OK by user
Cbh = Undock Fail by user
Cch = Surprise undock (AC source remove when docking)
Cdh = Battery polling
57h: Module identification
Return: One byte
bit0 : Ext. FDD exist
bit1 : Int. FDD exist
bit2 : IDE exist
other bit : Reserved
58h: Set flat panel type (Reserved)
2nd pram: Panel ID
59h: System state notification
2nd pram: A1h = System enter S2R state
A2h = System enter S2D state
A3h = System enter beep mode for battery LB state in CMOS setup
A4h = System enter quiet mode for battery LB state in CMOS setup
A5h = Thermal sensor is ready.
A6h = Thermal sensor is ready.
A7h = Thermal sensor is ready.
A8h = Thermal sensor disable
B1h = System into standby
B2h = System leave standby
B3h = Enable CRT icon (Reserved)
B4h = Disable CRT icon (Reserved)
B5h = VGA suspend enable
B6h = VGA suspend disable
B7h = Modem ring enable
B8h = Modem ring disable
B9h = Mute disable (Reserved)
Bah = Mute enable (Reserved)
Bbh = Autoboot enable (Reserved)
Bch = Autoboot disable (Reserved)
Bdh = TouchPad disable (Reserved)
Beh = TouchPad enable (Reserved)
Bfh = Disable POST debugging mode (Reserved)
C1h = force battery auto learning
C2h = disable battery learning
C3h = SMI trigger enable
C4h = SMI trigger disable
C5h = HCT enable (Reserved)
C6h = HCT disable (Reserved)
Satellite 1700 Series Maintenance Manual
3.8 KB-BIOS command support with SYSTEM-BIOS
3-35